Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
Painting this product is not allowed at all. Thus, just let your military CB antenna be and gain the approval of the officer in charge. You have no time to waste especially if you are going to be deployed in another mission in the next twenty four hours. Tardiness is not allowed in your line of work.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Only let a screwdriver remove the lid from the bottom. With the lid out of the way, you can already search for the cable. Thus, simply take your time and be certain that the cables have not been exposed beforehand since that can cause a friction between you and these objects which can be very dangerous.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Follow the adjustments you have to make to pass the SWR meter. This process may be tiring but this can keep you safe as you fight with the most notorious terrorists in the world. So, play by the book and only get out in the field once you already have the approval of your leader.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
Painting this product is not allowed at all. Thus, just let your military CB antenna be and gain the approval of the officer in charge. You have no time to waste especially if you are going to be deployed in another mission in the next twenty four hours. Tardiness is not allowed in your line of work.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Only let a screwdriver remove the lid from the bottom. With the lid out of the way, you can already search for the cable. Thus, simply take your time and be certain that the cables have not been exposed beforehand since that can cause a friction between you and these objects which can be very dangerous.
Turn the fifth capacitor slowly with the use of your tools. Make sure that it is the correct nub buy moving clockwise from the cable. Also, know the power capacity of the antenna for you to match things up. Excessively turning the capacitor would only dull other frequencies and even lead your radio to blow up.
Have more than enough length for the cable which you shall be using. If your CB is a little bit far, you can make use of the allowance to finally make the connection. Also, be able to protect yourself by using the right gear. Do not touch any of the heated parts without the official materials for your safety.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Follow the adjustments you have to make to pass the SWR meter. This process may be tiring but this can keep you safe as you fight with the most notorious terrorists in the world. So, play by the book and only get out in the field once you already have the approval of your leader.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
No comments:
Post a Comment